9.7.4. Manufactured Windows, Doors and Skylights

9.7.4. Manufactured Windows, Doors and Skylights
9.7.4.1. Application
  1. This Subsection applies to windows, doors and skylights covered in the scope of AAMA/WDMA/CSA 101/I.S.2/A440, "NAFS - North American Fenestration Standard/Specification for Windows, Doors, and Skylights" (Harmonized Standard).
9.7.4.2. General
  1. Manufactured and pre-assembled windows, doors and skylights and their installation shall conform to
    1. AAMA/WDMA/CSA 101/I.S.2/A440, "NAFS - North American Fenestration Standard/Specification for Windows, Doors, and Skylights" (Harmonized Standard),
    2. CSA A440S1, "Canadian Supplement to AAMA/WDMA/CSA 101/I.S.2/A440-11, NAFS - North American Fenestration Standard/Specification for Windows, Doors, and Skylights,"
    3. the remainder of this Subsection, and
    4. the applicable requirements in Subsection 9.7.6. (See Note A-9.7.4.2.(1).)
9.7.4.3. Performance Requirements
  1. Performance grades for windows, doors and skylights shall be selected according to the Canadian Supplement referenced in Clause 9.7.4.2.(1)(b) so as to be appropriate for the conditions and geographic location in which the window, door or skylight will be installed.
  2. Windows, doors and skylights shall conform to the performance grades selected in Sentence (1) when tested in accordance with the Harmonized Standard referenced in Clause 9.7.4.2.(1)(a).
  3. The minimum level of performance required for windows, doors and skylights shall be that of the Performance Class R.
  4. Exterior wood doors shall conform to CAN/CSA-O132.2 Series, "Wood Flush Doors," and shall have legibly indicated on them
    1. the name of the manufacturer,
    2. the standard according to which they were produced, and
    3. that they are of an exterior type.