All loose-fill fiber glass insulation is packaged in polyethylene bags. Whether pre-printed on the insulation bag or included on the package label, each package should contain the following information:

• Name, address and phone number of the manufacturer.
  
• Type and category of insulation. Net weight of insulation per bag.
• The manufacturer's recommended applica- tion instructions, including complete coverage charts.
• Listing of testing criteria and compliance standards which are applicable to fiber glass loose-fill insulation.
• Certification form that states the following: This insulation has been installed in confor- mance with the above recommendations to provide a value of R- using bags to cover square feet of area.1
  
• Place for builder's signature, company name and date.1
  Place for applicator's signature, company name and date.1
  Where material is intended for open or closed blowing application, the bag shall have a separate coverage chart for each type of application.

1 These requirements may be satisfied by a separate attic card containing the same information