The roof structure of an older building may or may not have insulation and/or barriers for air tightness. Before installing these layers in a retrofit, there are important steps to make in preparation.

SAFETY WARNING: Working on roofs and ceilings carries the risk of injury from falls. ALL workers should have proper training in fall arrest systems and safe working at heights procedures.

Attic insulation is one of the most common energy efficiency retrofits in older buildings. The area must be properly prepared for the new material addition:

• Ventilation: Improper ventilation of attic spaces can contribute to moisture building up, especially in cavities that are packed with new insulation. Care must be taken to properly arrange ventilation at roof soffits and ridges.
  
• Where rafters / trusses meet walls at the lowest part of the slope, adequate airspace must be allowed between new insulation and the underside of the roof deck. This space can be maintained with foam plastic or cardboard rafter baffles.
• Attic Hatches: Insulating and air sealing the attic hatch must be done to mitigate leaks and heat loss.

CONFINED SPACE SAFETY

While most attics will have sufficient ventilation to allow for fresh air circulation, there may be structures that would pose a hazard as a confined space.

According to the Canadian Centre for Occupational Health and Safety, a confined space hazard includes the following conditions:

• is not primarily designed or intended for continuous human occupancy
• has limited or restricted entrance or exit, or a configuration that can complicate first aid, rescue, evacuation, or other emergency response activities
• Can represent a risk for the for the health and safety of anyone who enters, due to one or more of the following factors:
  • its design, construction, location or atmosphere
  • the materials or substances in it
  • work activities being carried out in it, or the
  • mechanical, process and safety hazards present

Older buildings may have poor ambient ventilation, insects or rodent infestation that would create additional health hazards.

Ensure that you and your employees have sufficient training in working in confined spaces before completing this type of work.