Future Code - Construction & Renovation

LISTEN...

Contractors and renovators will use materials and methods very similar to the way we build now, with changes to insulation levels, airtightness and mechanicals. The planning process will give clear directions for high performance construction.

When planning and executing new construction and retrofits, we might see more of the following types of details:

CAVITY AND CONTINUOUS EXTERIOR INSULATION:


Creating a "super insulated" envelope may be achieved by filling framed cavities and providing for additional layers of insulation on the exterior of the assembly. This strategy also goes toward eliminating thermal bridges. Note that headers (rim joist) cavities are insulated and sealed the same as exterior walls.

INCREASED ATTIC INSULATION:


Attics and roof assemblies will need greater levels of insulation, in some cases totalling around R60 or more. Raised heel trusses and "hot roof" applications will be able to integrate the thermal boundary more easily with exterior walls, keeping the continuity of control layers in tact on above grade elements.

INCREASED INSULATION ON FOUNDATIONS:


Just like the rest of the building, foundations and basements will require more insulation and integration with above grade assemblies. As carbon tracking becomes more prevalent, we may see more slab-on-grade foundations instead of full basements.

CAREFUL DETAILING TO ELIMINATE THERMAL BRIDGING

The inclusion of exterior, continuous insulation in code is implied by R-values that are greater than what a framed cavity can hold. Some provincial codes specify continuous insulation by showing a "C.I." designation beside the required RSI / R-Value. As we construct and renovate buildings to higher performance, eliminating thermal bridges becomes increasingly critical - we need to carefully detail assemblies with proper sealing and insulation, inside and out.