• Install aerating, low-flow faucets and showerheads.
• Repair leaky faucets promptly; a leaky faucet wastes gallons of water in a short period of time.
• Set the thermostat on your water heater to 120°F to get comfortable hot water for most uses.
• Insulate your electric hot-water storage tank but be careful not to cover the thermostat. Follow the manufacturer's recommendations.
• Insulate your natural gas or oil hot-water storage tank but be careful not to cover the water heater's top, bottom, thermostat, or burner compartment. Follow the manufacturer's recommendations; when in doubt, get professional help.
• Insulate the first 6 feet of the hot and cold water pipes connected to the water heater.
• If you are in the market for a new dishwasher or clothes washer, consider buying an efficient, water- saving ENERGY STAR® model to reduce hot water use. See the Appliances section for more information.
• Install heat traps on the hot and cold pipes at the water heater to prevent heat loss. Most new water heaters have built-in heat traps.
• Drain a quart of water from your water tank every 3 months to remove sediment that impedes heat transfer and lowers the efficiency of your heater. Follow the manufacturer's directions.

Although most water heaters last 10-15 years, it's best to start shopping now for a new one if yours is more than 7 years old. Doing some research before your heater fails will enable you to select one that most appropriately meets your needs.