Procedure 4 - Configure The WLC To Use Cisco ISE As A RADIUS Server

The Cisco WLC uses the Cisco ISE as a RADIUS server. The following steps will walk you through the process of configuring the Cisco WLC to use Cisco ISE as its RADIUS server.

Step 1
Access the WLC GUI and navigate to Security > RADIUS > Authentication.

Step 2
Set the Call Station ID type to System MAC address


Step 3
Click Apply.

Step 4
Click New… on the top-right corner to add a new RADIUS authentication server.


RADIUS authentication server settings are listed in Table 2.


Step 5
Click Apply and Save Configuration.

Step 6
Click Accounting and New… to add RADIUS accounting servers.


RADIUS accounting server settings are listed in Table 3.