We will now configure the SSID with the appropriate security settings to enable 802.1X authentication with Cisco ISE defined as the RADIUS server.

Step 1

From the WLC, navigate to WLANs > WLAN ID to modify the SSID defined at bootstrap. If you want to define a new SSID, click WLANs > Create New > Go.

Step 2

Set the values for the General tab of the WLAN settings.

Step 3

Set the values listed for the Security > Layer 2 tab

Step 4

Set the values listed for the Security > AAA servers tab.

Step 5

Set the values for the Advanced tab

Step 6

Click Apply to save the WLAN settings.