| 1.3.1. | Referenced Documents |
| 1.3.1.1. | Effective Date
|
| 1.3.1.2. | Applicable Editions
|
Table 1.3.1.2.
Documents Referenced in the National Building Code of Canada 2015(1)
Forming Part of Sentence 1.3.1.2.(1)
| Issuing Agency | Document Number | Title of Document | Code Reference |
|---|---|---|---|
| AAMA |
501-05 |
Test for Exterior Walls | A-5.9.3. |
| AAMA | 501.1-05 | Water Penetration of Windows, Curtain Walls and Doors Using Dynamic Pressure | A-5.9.3. |
| AAMA | 501.2-09 | Quality Assurance and Diagnostic Water Leakage Field Check of Installed Storefronts, Curtain Walls, and Sloped Glazing Systems | A-5.9.3. |
| AAMA | 501.4-09 | Recommended Static Test Method for Evaluating Curtain Wall and Storefront Systems Subjected to Seismic and Wind Induced Interstory Drifts | A-5.9.3. |
| AAMA | 501.5-07 | Thermal Cycling of Exterior Walls | A-5.9.3. A-5.9.3.3.(1) |
| AAMA | 501.6-09 | Recommended Dynamic Test Method For Determining The Seismic Drift Causing Glass Fallout From A Wall System | A-4.1.8.18.(14) and (15) A-5.9.3. |
| ACGIH | 28th Edition | Industrial Ventilation: A Manual of Recommended Practice for Design | 6.2.1.1.(1) 6.3.2.14.(2) A-6.3.1.6. |
| AHAM | ANSI/AHAM RAC-1-1982 | Room Air Conditioners | Table 9.36.3.10. |
| AHRI | ANSI/AHRI 210/240-2008 | Performance Rating of Unitary Air-Conditioning and Air-Source Heat Pump Equipment | Table 9.36.3.10. |
| AHRI | 1060 (I-P)-2013 | Performance Rating of Air-to-Air Exchangers for Energy Recovery Ventilation Equipment | 9.36.3.8.(4) |
| AHRI | BTS-2000 | Efficiency of Commercial Space Heating Boilers | Table 9.36.3.10. |
| AISI | S201-12 | North American Standard for Cold-Formed Steel Framing - Product Data | 9.24.1.2.(1) |
| ANSI | A208.1-2009 | Particleboard | 9.23.15.2.(3) 9.29.9.1.(1) 9.30.2.2.(1) |
| ANSI/CSA | ANSI Z21.10.3-2013/CSA4.3-2013 | Gas-Fired Water Heaters, Volume III, Storage Water Heaters With Input Ratings Above 75,000 Btu Per Hour, Circulating and Instantaneous | Table 9.36.4.2. |
| ANSI/CSA | ANSI Z21.56-2013/CSA 4.7-2013 | Gas-Fired Pool Heaters | Table 9.36.4.2. |
| ANSI/CSA | ANSI Z83.8-2013/CSA 2.6-2013 | Gas Unit Heaters, Gas Packaged Heaters, Gas Utility Heaters and Gas-Fired Duct Furnaces | Table 9.36.3.10. |
| ASCE | ASCE/SEI 7-10 | Minimum Design Loads for Buildings and Other Structures | A-4.1.8.18.(14) and (15) |
| ASCE | ASCE/SEI 8-02 | Design of Cold-Formed Stainless Steel Structural Members | A-4.3.4.2.(1) |
| ASCE | ASCE/SEI 49-12 | Wind Tunnel Testing for Buildings and Other Structures | 4.1.7.12.(1) |
| ASHRAE | 1997 | ASHRAE Handbook - Fundamentals | A-9.32.3.11. |
| ASHRAE | 2013 | ASHRAE Handbook - Fundamentals | A-9.36.2.4.(1) Table A-9.36.2.4.(1)-D |
| ASHRAE | Guideline 12-2000 | Minimizing the Risk of Legionellosis Associated with Building Water Systems | 6.3.2.15.(4) 6.3.2.16.(3) |
| ASHRAE | ANSI/ASHRAE 62-2001 | Ventilation for Acceptable Indoor Air Quality (except Addendum n) | 6.3.1.1.(2) A-9.25.5.2. |
| ASHRAE | ANSI/ASHRAE 62.1-2007 | Ventilation for Acceptable Indoor Air Quality | 6.3.2.2.(1) |
| ASHRAE | ANSI/ASHRAE 103-2007 | Annual Fuel Utilization Efficiency of Residential Central Furnaces and Boilers | Table 9.36.3.10. |
| ASHRAE | ANSI/ASHRAE 140-2011 | Evaluation of Building Energy Analysis Computer Programs | 9.36.5.4.(8) |
| ASME/CSA | ASME A17.1-2010/CSA B44-10 | Safety Code for Elevators and Escalators | 3.2.6.7.(2) 3.5.2.1.(1) 3.5.2.1.(2) 3.5.2.1.(3) 3.5.4.2.(1) A-3.5.2.1.(1) Table 4.1.5.11. Table 4.1.8.18. |
| ASME/CSA | B18.6.1-1981 | Wood Screws (Inch Series) | Table 5.9.1.1. 9.23.3.1.(3) A-9.23.3.1.(3) |
| ASTM | A 123/A 123M-13 | Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products | Table 5.9.1.1. Table 9.20.16.1. |
| ASTM | A 153/A 153M-09 | Zinc Coating (Hot-Dip) on Iron and Steel Hardware | Table 5.9.1.1. Table 9.20.16.1. |
| ASTM | A 252-10 | Welded and Seamless Steel Pipe Piles | 4.2.3.8.(1) |
| ASTM | A 283/A 283M-13 | Low and Intermediate Tensile Strength Carbon Steel Plates | 4.2.3.8.(1) |
| ASTM | A 390-06 | Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line) | Table 9.10.3.1.-B |
| ASTM | A 653/A 653M-13 | Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | Table 5.9.1.1. 9.3.3.2.(1) |
| ASTM | A 792/A 792M-10 | Steel Sheet, 55% Aluminum-Zinc Alloy-Coated by the Hot-Dip Process | 9.3.3.2.(1) |
| ASTM | A 1008/A 1008M-13 | Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable | 4.2.3.8.(1) |
| ASTM | A 1011/A 1011M-14 | Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength | 4.2.3.8.(1) |
| ASTM | C 4-04 | Clay Drain Tile and Perforated Clay Drain Tile | Table 5.9.1.1. 9.14.3.1.(1) |
| ASTM | C 27-98 | Fireclay and High-Alumina Refractory Brick | 9.21.3.4.(1) |
| ASTM | C 73-10 | Calcium Silicate Brick (Sand-Lime Brick) | Table 5.9.1.1. 9.20.2.1.(1) |
| ASTM | C 126-13 | Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units | Table 5.9.1.1. 9.20.2.1.(1) |
| ASTM | C 177-13 | Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus | 9.36.2.2.(1) |
| ASTM | C 212-14 | Structural Clay Facing Tile | Table 5.9.1.1. 9.20.2.1.(1) |
| ASTM | C 260/C 260M-10a | Air-Entraining Admixtures for Concrete | 9.3.1.8.(1) |
| ASTM | C 411-11 | Hot-Surface Performance of High-Temperature Thermal Insulation | 3.6.5.4.(4) 3.6.5.5.(1) 9.33.6.4.(4) 9.33.8.2.(2) |
| ASTM | C 412M-11 | Concrete Drain Tile (Metric) | Table 5.9.1.1. 9.14.3.1.(1) |
| ASTM | C 444M-03 | Perforated Concrete Pipe (Metric) | Table 5.9.1.1. 9.14.3.1.(1) |
| ASTM | C 494/C 494M-13 | Chemical Admixtures for Concrete | 9.3.1.8.(1) |
| ASTM | C 516-08e1 | Vermiculite Loose Fill Thermal Insulation | A-9.25.2.4.(5) |
| ASTM | C 518-10 | Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus | 9.36.2.2.(1) |
| ASTM | C 553-13 | Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications | Table 5.9.1.1. |
| ASTM | C 612-14 | Mineral Fiber Block and Board Thermal Insulation | Table 5.9.1.1. |
| ASTM | C 700-13 | Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated | Table 5.9.1.1. 9.14.3.1.(1) |
| ASTM | C 726-12 | Mineral Wool Roof Insulation Board | Table 5.9.1.1. 9.25.2.2.(1) |
| ASTM | C 754-11 | Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products | Table A-9.11.1.4.-A Table A-9.11.1.4.-B Table A-9.11.1.4.-C Table A-9.11.1.4.-D |
| ASTM | C 834-10 | Latex Sealants | Table 5.9.1.1. 9.27.4.2.(2) |
| ASTM | C 840-13 | Application and Finishing of Gypsum Board | Table 5.9.1.1. |
| ASTM | C 920-14 | Elastomeric Joint Sealants | Table 5.9.1.1. 9.27.4.2.(2) |
| ASTM | C 954-11 | Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness | 9.24.1.4.(1) |
| ASTM | C 991-08e1 | Flexible Fibrous Glass Insulation for Metal Buildings | Table 5.9.1.1. |
| ASTM | C 1002-07 | Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs | Table 5.9.1.1. 9.24.1.4.(1) 9.29.5.7.(1) |
| ASTM | C 1177/C 1177M-13 | Glass Mat Gypsum Substrate for Use as Sheathing | 3.1.5.14.(6) 3.1.5.15.(4) Table 5.9 |