| 9.17.3. |
Steel Columns |
| 9.17.3.1. |
Size and Thickness
- Except as permitted in Sentence (2), steel pipe columns shall have an outside diameter of not less than 73 mm and a wall thickness of not less than 4.76 mm.
- Columns of sizes other than as specified in Sentence (1) are permitted to be used where the loadbearing capacities are shown to be adequate.
|
| 9.17.3.2. |
End Bearing Plates
- Except as permitted in Sentence (2), steel columns shall be fitted with not less than 100 mm by 100 mm by 6.35 mm thick steel plates at each end, and where the column supports a wooden beam, the top plate shall extend across the full width of the beam.
- The top plate required in Sentence (1) need not be provided where a column supports a steel beam and provision is made for the attachment of the column to the beam.
|
| 9.17.3.3. |
Paint
- Exterior steel columns shall be treated on the outside surface with at least one coat of rust-inhibitive paint.
|
| 9.17.3.4. |
Design of Steel Columns
(See Note A-9.17.3.4.)
- Where the imposed load does not exceed 36 kN, adjustable steel columns shall conform to CAN/CGSB-7.2, "Adjustable Steel Columns."
- Steel columns other than those described in Sentence (1) shall be designed in accordance with Part 4.
|