Procedure 5 - Check The NAD Interface Status Or The ISE Detailed Reports
| Step 1 |
| If this is a Cisco
Catalyst switch, log in using Telnet or Secure Shell (SSH) and run
following command in enabled mode: |
| Step 2 |
(Optional) If the
switch is configured for ISE to poll information via SNMP, open
detailed reports by selecting Operations > Authentications. Then
click on the 
button. Here are the results:show authentication sessions interface Gig x/y/z 
|
| Step 3 |
| (Optional) In
Detailed Reports, click the interface name (for example, Gigabit
Ethernet x/y/z). |
| Step 4 |
| This will do a SNMP
poll that is the equivalent of the show
authentication command in step 1 without your having to
log in to the individual switch. |